Gradall 534B (9103-1148) Operation Manual User Manual download pdf (Page 7)

CHECKS AND SERVICES

BEFORE STARTING ENGINE

(To be performed at beginning of each work shift)

Use extreme caution when checking items

beyond your normal reach. Use an

approved safety ladder.

Before removing filler caps or fill plugs, wipe all dirt

and grease away from the ports. If dirt is allowed to

Complete all required maintenance before operating unit.

enter these ports, it can shorten the life of o-rings.

seals, packings and bearings.

When adding fluids or changing filter elements,

refer to the lubrication section of this manual to

determine the proper type to be used.

If spark arrestors are required, be sure they are in

place and in good working order.

Inspect all structural members, including attach-

ment, for signs of damage.

Check to be sure rear planetary hubs are properly

set for the type of travel expected.

Service the unit in accordance with the lubrication

and maintenance schedule.

Inspect unit for obvious damage, vandalism

and needed maintenance. Check for signs of fuel,

lubricant, coolant and hydraulic leaks. Open all

access doors and look for loose fittings, clamps,

components and attaching hardware. Replace

hydraulic lines that are cracked, brittle, cut or show

signs of abrasion.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

No comments

Gradall 534B (9103-1148) Operation Manual User Manual Page 7