Gradall 524D User Manual download pdf (Page 196)

522D-524D

MATERIAL HANDLER

13-18

OPTIONAL EQUIPMENT

(9114-3267) Cab Enclosure Kit

Starting Serial No. 0277001

Original Issue 1-98

Revised 7-13-01

Item Part No. Qty. Description Of Part

9114-3267 1 CAB ENCLOSURE KIT, (includes all

items on pages 13-17 thru 13-19)

9114-4469 1 LATCH RETRO FIT KIT, (includes

items 31, 41 thru 48 & 50)

9133-4007 1 L.H. SIDE ASSY, (includes all items

on page 13-18)

9134-4010 1 UPPER DOOR ASSY, (includes items

1 thru 13)

9134-4011 1 LOWER DOOR ASSY, (includes items

24, 31, 32 and 37 thru 56)

9133-4012 1 DOOR HOLD OPEN ASSY, (includes

items 27 thru 30)

1 9134-4012 1 UPPER FRAME ASSY, (painted)

2 9134-4013 1 WINDOW LATCH ASSY, (includes

items 14 thru 19 & item 12 as

required)

3 8026-4091 21.5 BULB SEAL, 90 DEGREE

4 Ref GLASS, (see page 13-19 for details)

5 9134-4014 .17' FOAM, .438X.375

6 9133-4034 AR BLACK URETHANE

7 8026-4084 1 GROMMET, .51X1.06

8 9134-4015 1 BUSHING

9 8026-4082 1 WASHER

10 9134-4016 1 DOOR ANGLE

11 9134-4017 2 SCREW, .25-20X1.25

12 9134-4018 AR LOCTITE, BLUE

13 9134-4019 1 GROMMET, .375X.875

14 9134-4020 1 NUT, .25-20, GR5

15 9134-4021 1 BOLT, .375-16X1.00

16 9134-4022 2 STEEL LATCH

17 9134-4023 1 POLYURETHANE LATCH

18 8026-4108 1 KNOB

19 9134-4024 1 SCREW, .25X1.00

20 9114-4435 1 CAB KIT SERIAL TAG

21 9134-4025 1 FOAM, L.H. SIDE PANEL

22 9134-4026 AR ADHESIVE, HIGH PERFORMANCE

Item Part No. Qty. Description Of Part

23 9133-4018 2 LOCKNUT, .375-16

24 9134-4027 1 DOOR STRAP

25 9133-4033 3 FLAT WASHER, .375X.88

26 9133-4018 2 LOCKNUT, .375-16

27 9134-4028 1 DOOR HOLD BRACKET WELD

28 9134-4029 1 DOOR HOLD OPEN ROD

29 9134-4019 1 GROMMET, .375X.875

30 9134-4030 1 COTTER PIN, 1/8X.75

31 9148-4028 1 PADDLE LATCH, (see illustration &

notes at top of page)

32 8096-4051 1 DOOR KEY, #510, (old style latch)

9114-4470 1 DOOR KEY, CH 751, (new style latch)

33 9134-4031 7.5' BULB SEAL, 1/4 CLIP

34 Ref GLASS, (see page 13-19 for details)

35 8026-4033 2 WINDOW CLIP

36 8026-4034 4 SCREW, #10-32X1.50

37 9134-4043 6 SCREW, .25-20X.625

38 9134-4032 1 GRAB HANDLE, (inside)

39 9134-4033 .25" FOAM, PSA 3/16X5/8

40 9148-4030 1 LOWER DOOR WELDMENT

41 9148-4029 1' BULB SEAL

42 9148-4034 2 MOUNTING BRACKET

43 8038-4191 4 SCREW, 10-24X.5

44 8038-4187 1 ROD RETAINER CLIP

45 9148-4036 1 CAM LATCH

46 9148-4035 1 LINKAGE ROD

47 8038-4185 1 ROD RETAINER CLIP

48 8026-4074 4 SCREW, .25-20X.75

49 8026-4046 4 NUT, .25-20

50 9148-4031 1 CENTER STIFFENER COVER

51 9116-4096 2 SCREW, .25-20X.75

52 9134-4047 1 LOWER DOOR FOAM

53 9134-4046 AR BLACK URETHANE

54 9134-4045 2 VINYL CAP

55 9148-4024 6' BULB SEAL

56 8026-4091 2.5' BULB SEAL

* Total revision of page.

9134-3056

INSIDE & OUTSIDE LATCH KIT

USED ON CAB ENCLOSURE KITS

PRIOR TO ANGUS-PALM S/N T2702A &

ENCLOSED CABS PRIOR TO S/N P9623M

1) Remove door stiffener cover and mounting hardware.

2) Remove inside door release mounting hardware. Including

(1) .25-20x1.00 screw, (1) .28 ID x 1.00 OD washer, (1) nylon

bushing, (2) .406 ID x 1.25 OD washers, (2) .312-18 lock nut,

(1) plate, door link, and (1) .25-20 lock nut.

3) Install new inside door release hardware as shown.

4) Reverse spring attachment as shown.

5) Replace door stiffener cover and hardware.

MOVE LATCH UP - FIRE SOONER

MOVE LATCH DN - FIRE LATER

ADJUST STRIKER STUD TO ALIGN

WITH CAM LATCH JAWS

FURTHER ADJUSTMENT:

LOOSEN CAP SCREWS

MOVE CAM

RETIGHTEN - SET CLUTCH

ON CORDLESS DRIVER TO

_ FT LBS

HEX NUT 25-20

HAND TIGHTEN TO

BUSHING & JAM TIGHTEN

TO END NUT(retain)

AT LEAST 1/2

STROKE TRAVEL IS

OPTIMAL

REPLACE PLATE LINK

WASHER, .28IDx1.50OD

(retain)

DISCARD OLD

BOLT & REPLACE

WITH LONGER BOLT.

WHEN INSTALLED

BOLT SHOULD BE

TIGHT & NOT GIVE.

DISCARD OLD

NYLON BUSHING &

REPLACE WITH STEEL

BUSHING MUST TURN FREELY

BOLT .312-18 (REF)

RETAIN

THE INSIDE DOOR RELEASE MAY NEED TO

BE ADJUSTED LATERALLY BY WAY OF THE

SLOTTED HOLES, TO AFFECT PROPER ACTUATION

FROM EXTERIOR PADDLE LATCH HALF STROKE

LINK PLATE GOES BEHIND

CAM LATCH LEVER

BEND OUTWARD SLIGHTLY TO

ENSURE LINK PLATE RIDES

AGAINST WASHER & NOT ON NUT

CAM, LATCH (REF)

PADDLE LATCH SHOULD ACTUATE CAM

LATCH AT HALF STROKE TRAVEL (OPTIONAL)

ENSURE STAKE PIVOT IS

COMPRESSED FIRMLY TO LATCH

BODY AND IS NOT LOOSE

(IF LOOSE, REPLACE LATCH)

NUT, LOCK 25-20 (RETAIN)

SPRING (REF)

PADDLE LATCH INSTALLATION

USED ON CAB ENCLOSURE KITS WITH

ANGUS-PALM STARTING S/N T2702A &

ENCLOSED CABS STARTING S/N P9623M

NOTE: IF YOUR CAB ENCLOSURE CONTAINS THE LATCH

ASSY, (shown left), IT IS RECOMMENDED TO

UPDATE TO CURRENT STYLE, (shown below), BY

ORDERING LATCH RETRO FIT KIT, 9114-4469, (see

parts list for details).

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 224 225

Comments to this Manuals

No comments

Gradall 524D User Manual Page 196

Comments to this Manuals

Related products and manuals for Hoist Gradall 524D